3 Practical Ways to Weatherproof Wood Once You Become a Carpenter

Have you decided to become a carpenter

Outdoor structures, whether they’re patios, fences, or decks, are prone to the whims of the weather. Whether Mother Nature throws blistering heat or a blizzard at these structures is irrelevant; over time, the wood being used to maintain them will eventually rot or warp if it’s not treated properly. To stand the test of time, wood needs to be weatherproofed. This way, differences in the weather have zero impact on the quality of the wood or sturdiness of the structure it supports.

If you’ve been thinking about becoming a carpenter, you’ll need to learn which methods work to prevent the ruin of the materials you’ll be using. Read on for three practical ways to do that.

1. Students in Carpenter Training School Know Wood Can Be Treated With Oil

The first thing to know if you’re trying to weatherproof wood is that it can be done with a variety of different oils, from linseed to walnut to tung. Each of these has the same effect on the wood as long as it is being applied properly. Right off the bat, you need to gauge how much oil you’ll need. The amount of oil you’ll need for the job is directly dependent on the amount of wood you want to treat. Following that, put the oil in a mixture with turpentine and apple cider vinegar. What this does is create a stronger finish that will be better equipped to handle the weather. Once the mixture is created, simply sand the wood so that it’s evenly coloured throughout, and then apply multiple coats of the oil mixture, allowing multiple hours for it to dry in between each application. If you’ve ever thought that you might like to become a carpenter, learning how to effectively use oil to treat wood is important to know.

Students taking carpenter courses know how effective oil is at protecting wood from weather
Students taking carpenter courses know how effective oil is at protecting wood from weather

2. In Carpenter Courses, You’ll Learn All About Sealants

A second way to protect wood is to waterproof it by using a sealant. To do this, the wood needs to be stripped clean of any finish or oil that was on before, and likely needs to be sandpapered extensively. Sealants generally don’t need to be mixed with any other products, so they can be applied at any point after they’ve been purchased. It is, however, important to stress the importance of providing an even coat. Pros who have completed carpenter courses know that each coat can take up to ten hours to dry. In addition, each coat will also need to be cleaned after drying before a new coat is applied on top. After a third coat, the wood should sit for a few days before anything is placed on it.

3. Wood Can Be Weatherproofed by Using a Stain

Another way that wood can be weatherproofed is by using a stain. A stain should be chosen based on how strong you want the oil-content to be. Generally, the lighter the colour of the stain, the more oil it contains. Once it’s been purchased, the wood needs to be sanded down and prepared before an initial coat is applied. Three coats of stain will be needed, but it’s important to let the stain dry in between each coat and to sand down any excess buildup before a new coat is applied.

Graduates of carpenter training school know that a stain can be used to preserve wood
Graduates of carpenter training school know that a stain can be used to preserve wood

Have you been thinking about going to carpenter training school?

Visit Pre-Apprenticeship Training (PAT) Institute for more information or to speak with an advisor!

Are You Career Training Ready? Find Out!
Take the "Career Exploration Kit"

This fun, online quiz takes 3-minutes to complete and you’ll get a personalized report. Identify your strengths and social style, plus the training and positions you’re best suited for. Get Your Career Readiness score now

Take the Career Exploration Kit