What to Expect from a Gas 2 Training Program

gas 2 training program
Class in session at the Pre-apprenticeship Training Institute (Toronto and Cambridge)

So, you’ve earned your G3, and are ready to go after your G2 certification. There are many good reasons to level up, and challenge the TSSA G2 exam.

You’ll need this Certificate of Qualification to build your career in plumbing, HVAC, appliance repair—or to find employment as a gas fitter in Ontario.

So, what can you expect to learn in a Gas 2 training program? What should you look for in a quality program, and keep in mind about the exam? Here’s what you need to know.

Content of the Gas 2 Training Program

G2 training picks up where your G3 certificate left off. It’s a combination of theory and hands-on training, designed by the TSSA (Technical Standards & Safety Authority), to prepare you for the Ontario qualifying exam.

What will you be learning in this program? Courses include:

  • advanced piping and tubing systems
  • understanding the building as a system
  • working with domestic and non-vented appliances
  • water heaters and combo systems
  • forced warm air heating systems
  • hydronic heating systems
  • air handling
  • conversion burner
  • domestic gas fired refrigerators
  • gas metres, pressure regulators, and relief

The goal is to prepare students to work, unsupervised, on natural gas or propane appliances that have an input of 400,000 BTUH or less.

Once you complete all the courses, you’ll be fully prepared to take the G2 TSSA exam, and earn your Certificate of Qualification for Gas Technician 2. More on that next…

Related: Gas Technician Certification: Top 4 Reasons to Get Your License

Taking Your G2 Certification Exam

Your G2 written exam will consist entirely of multiple choice questions. TSSA gas technician exams run for up to 3.5 hours—but you can apply for extra time if you have a documented disability.

Here are a few important rules to know about:

  • you must get at least 75% in every one of your G2 courses to qualify for the exam
  • you must take the TSSA exam within 1 year of completing training
  • you must submit an exam application and pay a fee (you can’t just show up at a testing centre)
  • you must cancel at least 2 weeks in advance, or you won’t get your exam fee refunded
  • you need a 75% to pass the TSSA Gas Technician 2 exam
  • if you fail the exam 3 times, you have to go back, and take the G2 training program again

Note: If the TSSA discovers that you didn’t meet one of these requirements, they will make you re-write the test, and/or start over with training.

Have doubts about whether you’re eligible to challenge the G2 exam? You can call TSSA customer service to review the requirements, and confirm you’ve covered all the bases.

Gas Technician Career Opportunities

The job forecast is positive for gas technicians in Ontario. The Government of Canada Job Bank gives this occupation 2/3 stars for demand across Ontario.

We can expect moderate growth in this sector, and a fair number of new jobs to open up over the next years.

Wages are good too, with the median salary for gas fitters reaching approximately $26/hour (or about $54,000/year).

G2 training program

Where can you work as a certified gas technician? Common options include:

  • gas utility and gas servicing companies
  • plumbing and HVAC companies
  • construction firms

Typical responsibilities for this role include:

  • installing, inspecting, and repairing gas lines and gas equipment (such as metres and heating units)
  • testing and replacing defective components
  • testing for gas leaks
  • dealing with gas escape calls, and investigating gas fires and explosions
  • converting appliances to natural gas
  • servicing gas appliances

Finding the Right G2 Training Program

First and foremost, you’ll need to confirm the G2 training program you choose is approved by the TSSA.

Trades schools that deliver gas training must be registered with, and accredited by, the TSSA—or your application for a Certificate of Qualification will not be accepted.

Other than that, it’s about choosing a school you trust, and finding a class schedule that fits your needs.

There are full-time and part-time options out there. You can work through the program one course at a time, or complete them all back-to-back.

At the Pre-apprenticeship Training (PAT) Institute, our Gas 2 Technician Training takes 24 weeks to  complete, with both day and evening classes available.

We offer this program at the Toronto and Cambridge campus.

Interested in learning more about PAT’s Gas Technician 2 Program? We’d be happy to talk with you. You can chat live with an advisor right now, using the tool on this screen.

Or, click below to request free information and get started with your application.

 

Request free information about Gas Technician 2 Training

Are You Career Training Ready? Find Out!
Take the "Career Exploration Kit"

This fun, online quiz takes 3-minutes to complete and you’ll get a personalized report. Identify your strengths and social style, plus the training and positions you’re best suited for. Get Your Career Readiness score now

Take the Career Exploration Kit